headerimage

DR10

Differential pressure gauges with Bourdon tube element

 

Service intended: Measurement of pressure differential of 2 pressures applied. Suitable for gaseous and liquid, non-crystallizing media that will not obstruct the pressure system. Scale range must be selected in consideration of the highest static pressure applied. When ordering please state both, the static pressure applied and the pressure differential.
 

hr
Downloads
Technical Details
Operation Manual
Technical Data
Construction
similarly EN 837-1
Case
Ø 100 and 160 mm, stainless steel
Panel mounting case DIN 43700, 144 x 72 and 192 x 96 mm
Protection
IP 33 per EN 60529 / IEC 529
Pressure connection
2 x G1/2B, parallel behind, brass identified + and -
Pressure element
< 100 bar, CuSn8 - 2.1030, soft - soldered
> 100 bar, st.st. - 316L, hard soldered
Movement
Base and cover plate, brass
Drive shaft, nickel silver
Pointer
1 x standard pointer, aluminium, black
1 x rotating pointer scale, aluminium, white, red pointer,
scale with +/- 50 % of indicating range of + and -
differential pressure scale
Dial
Aluminium, white
Black scale and lettering
Window
Instrument glass
Accuracy class
1,6
Temperature error Tref 20°C
Rising temperature : + 0,3 % FS / 10 K
Falling temperature : -0,3 % FS / 10 K
Ambient temperature Tmin / Tmax
-25 ... + 60°C
Medium temperature Tmax
Soft soldered pressure element, + 60°C
Brazed pressure element, + 100°C
Working pressure
Steady: 1,0 x full scale value
Fluctuating: 0,9 x full scale value
Short time overpressure: 1,3 x full scale value
Optional extras
see Technical Details page 04.0103